I have lost my way in the world of software and its now time to brush the dust off my interest in building hardware
Introduction I have written about the Timed LED Lighting Controller in previous posts. Starting with the original entry “Stairwell Foot Lighting System”. In this entry I will be wrapping up the project and describing the change of direction from the initial design and layout. There may be a bit of overlap but it will be … Continue reading Wrapping up the Timed LED Lighting Controller Project
In the last entry for the Timed LED Lighting Controller, I realised that there are no working examples of an I²C driver for the ATtiny20. I then had to work through the data sheet to implement my own. With that done, I could then start on the application firmware and get the board really working. So … Continue reading From Proof of Concept to Prototype
In this post I describe the trials an tribulations of bringing up my Timed LED Lighting Controller and how I went about implementing my first I²C Slave Driver for the ATTiny20. I was keen to receive the boards for the Timed LED Lighting controller to know if they would fit in the chosen housing. The … Continue reading Back to Blinky
Rebooting Electronics 