I created the main board in the same pattern as the original. That made for quite an expensive prototype as there is a lot of empty space. This size is needed to fit the tactile switches in their proper places. Now that I have Revision 2 up and running, a write up of what I have … Continue reading The Main Board
Back to the Drawing Board
Well, not exactly back to the drawing board for everything... What has developed since doing the actual schematic is that the display module was treated as a black box. Now it is time to open this up and understand how this is to work. The beauty of this approach is that not knowing anything about … Continue reading Back to the Drawing Board
Wired for Action – almost
In the last post, I presented the initial ideas for powering the project. Now it is time to move on and start looking into the individual modules. I was impressed as to how quickly this part progressed since I had done the up-front thinking of the pin and port allocation. So much so, that before … Continue reading Wired for Action – almost
Rebooting Electronics 